OLEC OLITE PRINTING LAMPS
SAME DAY DELIVERY FROM DOUTHITT WAREHOUSE
(FACTORY AUTHORIZED SALES AND SERVICE)
AL13 OLITE
Printing Lamp Assembly, Tri-Level 1000 Watt (1000-600-400).
Electrical: 115 Volt, Single Phase, 9 amps maximum operating current
Shipping Weight: 35 lbs.
AL19/20 OLITE
Printing Lamp Assembly, Tri-Level 1900 Watt (19-13-6).
Electrical:
AL19 115 Volt, Single Phase, 20 amps maximum operating current. .
AL20 220 Volt, Single Phase, 10 amps maximum operating current.
Shipping Weight: 70 lbs.
AL23 OLITE
Printing Lamp Assembly, Tri-Level 2300 Watt (2300-1600-1000).
Electrical: 220 Volt, Single Phase, 12 amps maximum operating current
Shipping Weight: 125 lbs.
AL35 OLITE
Printing Lamp Assembly, Tri-Level 3500 Watt (3500-2000-900).
Electrical: 220 Volt, Single Phase, 16 amps maximum operating current
Shipping Weight: 175 lbs.
AL53 OLITE
Printing Lamp Assembly, Tri-Level 5000 Watt (5-2-1).
Electrical: 220 Volt, Single Phase, 23 amps maximum operating current
Shipping Weight: 200 lbs.
AL83* OLITE
Printing Lamp Assembly, Tri-Level 8000 Watt (8-3.5-2).
Electrical: 220 Volt, Single Phase, 42 amps maximum operating current
Shipping Weight: 200 lbs.
*HF1 Exhaust System recommended with AL83.
REPLACEMENT BULBS FOR OLITE LAMPS
- FOR AL9/AL13
L900 Multi Spectrum Lamp.
L902 Photopolymer Lamp.
- FOR AL19/AL20
L1250E Dual Spectrum Lamp.
- FOR AL23/35/53/100* LAMPS (*Two required for AL100)
L1250 Dual Spectrum Lamp.
L1261 Photopolymer Lamp.
L1252 Photopolymer/Diazo Lamp.
- FOR AL83 LAMP
L1280 Diazo Lamp.
L1281 Photopolymer Lamp.
L1282 Dual Spectrum Lamp.
FOR AL83/AL53/AL35/AL23/AL19/AL20 LAMPS:
(A) Filter Holder with either Kokomo or Clearing Filter.
(B) Rolling Filter Holder with either Kokomo or Clearing Filter.
(C) Dual Rolling Filter Holder with Kokomo and Clearing Filter.
(D) Motorized Rolling Filter Holder with Kokomo or Clearing Filter.
(E) Motorized Dual Rolling Filter Holder with Kokomo and Clearing Filter.
(F) Exhaust System.
(G) Floor stand for vertical printing.
Olite lamp assemblies feature a
selection of computer designed
reflectors, a rotary shutter (except
AL13), electronically controlled
servo cooling, CW Ballasting and a
low profile design.
